• Quickly and efficiently mix Soil₂O^® into your tanks.
• Precisely engineered to mix water and Soil₂O^®.
• High-tech “venturi system” created specifically for the needs of dust suppression.

Specifications

Shipping Information:

2.5″ High-Volume Eductor System (2.5″ National Hose Thread)

Soil₂O^® 2.5” eductors operate best at 200 psi (1400 kPa) (14 bar) with the red internal cone installed a throttled nozzle or closed bail will shut down the ability to entrain powder concentrate.

Soil₂O^® 2.5” eductors with high-volume (mixing) cones operate best with a flow rate of 350 – 425 GPM and pressure above 30 psi, depending on internal cone size. For maximum performance , a discharge hose with an I.D. equal to or greater than the outlet fitting on the eductor should be utilized without restriction – higher pressures can lower the need for minimum flow rate.

Note: Customer is required to check the performance of the eductor installed on the intended equipment before service use. If the unit is functioning properly, strong suction can be felt when:

• A finger or thumb is placed over the pickup tube with the concentrate ball valve open.

Reference Documents

Product Sales Information

• Soil₂O^® Dust Control – Sales Sheet
• Soil₂O^® Dust Control – Application Process
• Soil₂O^® Dust Control – Connecting & Educting

Scientific Testing & Data Information

• Soil₂O^® Dust Control SDS
• Soil₂O^® Dust Control – Human & Environmental Safety Information

Purchase

orders@geltechsolutions.com | 800-924-4874

Media